MikroTik RBcAP2nD, 2dBi, 22dBm, 650MHz, 64MB, 2.4GHz, 1xEthernet, L4

43,22
(53,59 με ΦΠΑ)
034.0212
Άμεση
+
Προσθήκη στα αγαπημένα

Εγγύηση:

  • 1 έτος

RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.

cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.

Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.


Specifications

Details
Product codeRBcAP2nD
ArchitectureMIPSBE
CPUQCA9533
CPU core count1
CPU nominal frequency650 MHz
Dimensions185mm diameter, 31mm height
License level4
Operating SystemRouterOS
Size of RAM64 MB
Storage size16 MB
Storage typeFLASH
Tested ambient temperature-40C to +70C

Powering

Details
Max Power consumption4W
PoE in802.3af/at
PoE in input Voltage11-57 V
Number of DC inputs1 (PoE-IN)

Wireless

Details
Wireless 2.4 GHz number of chains2
Wireless 2.4 GHz standards802.11b/g/n
Antenna gain dBi for 2.4 GHz2
Wireless 2.4 GHz chip modelQCA9533

Ethernet

Details
10/100 Ethernet ports1

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s22-96
11MBit/s22-89
6MBit/s20-93
54MBit/s18-74
MCS020-93
MCS716-71

Included parts



Ethernet test results

RBcAP2nDQCA9533 100M one port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)8.198.423.596.3173.688.9
Bridging25 bridge filter rules8.198.423.596.370.936.3
Routingnone (fast path)8.198.423.596.3160.882.3
Routing25 simple queues8.198.423.596.390.846.5
Routing25 ip filter rules8.198.423.596.343.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Support & Downloads

MPN
:
RBcAP2nD