Φίλτρα

Κατασκευαστής
074.0033
8,85 (10,97 με ΦΠΑ)
DFRobot, DFR0343, 5212019508810

μHex is the first low-power controller which is compatible with Arduino. It is very suitable for the battery power supply environment. A 210mAh CR2032 cell battery could make it work 60 days long.

  • Bootloader is write protected, please do not attempt to update Bootloader.
  • For large load applications (such as motor controlling), please connect VCC & GND directly or supply with independent power.
Άμεση
+
Προσθήκη στα αγαπημένα

070.9819
4,00 (4,96 με ΦΠΑ)
OPTUM, HS0439
Blue clear Arduino UNO R3 case  UNO R3 is not inclued
Άμεση
+
Προσθήκη στα αγαπημένα

070.9820
4,00 (4,96 με ΦΠΑ)
OPTUM, HS0440
RED clear Arduino UNO R3 case
Άμεση
+
Προσθήκη στα αγαπημένα

070.9818
4,00 (4,96 με ΦΠΑ)
OPTUM, hs0438
white clear Arduino UNO R3 case Δεν περιλαμβάνεται το Arduino.
Άμεση
+
Προσθήκη στα αγαπημένα

074.0028
17,30 (21,45 με ΦΠΑ)
DFRobot, DFR0360, 5212019509251

XSP Programmer is designed for Arduino/AVR device. It is a driver free programmer, supporting Arduino/AVR ISP and FTDI programming. It could provide both 5V and 3.3V power output or self-adaption power output(OFF mode). Support Xbee socket and auto-match ISP clock frequency. With this programmer, you can adjust its interface for your own device. Quite convenient and easy to use. It will be your good friend, when you coding and programming. It could work with eClip programming Fixture together.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0060
36,00 (44,64 με ΦΠΑ)
DFRobot, DFR0222, 5212019509749

Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet. The Xboard Relay combines an Atmega 32u4 microprocessor and wiz5100 chip which is fully compatible with Arduino Lendardo and Ethernet library, it has build-in Xbee socket and 2 Relays which allow an easy sensoring and controlling over internet.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0072
20,25 (25,11 με ΦΠΑ)
DFRobot, DFR0174, 5212019509404

The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The Atmega8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file is required. It's compatible with all the products using XBee socket. It provides a faster and stable wireless communication for your projects.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0106
8,10 (10,04 με ΦΠΑ)
DFRobot, 5212019508780

The Arduino XBee shield is designed to meet wireless sensor networks such as wifi, bluetooth 2.0/4.0 and zigbee. The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0368
18,00 (22,32 με ΦΠΑ)
DFRobot, TEL0107
ΕΙΣΑΓΩΓΗ  Το WiFi Bee MT7681 είναι μια μονάδα Arduino WiFi XBee βασισμένη στην σειριακή μονάδα Wi-Fi MT7681. Είναι συμβατό με μια υποδοχή XBee,...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0117
70,00 (86,80 με ΦΠΑ)
DFRobot, TEL0079, 5212019509992
INTRODUCTION DFRobot WiFi Shield for Arduino, is part of our wireless family product. This WIFI Shield V3 supports AP + STA dual mode, and is...
Άμεση
+
Προσθήκη στα αγαπημένα