LCD Display Light Weight Weighing Scale

LCD Display Light Wight Weighing Scale for Kitchen Home Gold Jewellery Multi Use

USER MANUAL

• OPERATION:

1. Place scale on a horizontal flat surface press [ON/OFF] key to turn on the scale.
2. Wait until “0.0” or “0.00” is displayed.
3. Put the object(s) on the weighing platform.
4. Using the [MODE] key. you can switch between the weighing units.

• TARE WEIGHING:

1. Turn on scale as described above.
2. Place the “tare item” on the platform.
3. Press [TARE] and wait until “0.0” or “0.00” is displayed.
4. Add the “net-weight-item”.

• CALIBRATION:
  
  

1. Turn on the scale by pressing [ON/OFF] key.
2. Wait until the LCD displays “0.0” or “0.00” and then press and hold [MODE] key for 3 seconds the LCD will display “CAL” and then release the [MODE] key.
3. Press the [MODE] key again the LCD will display “CAL” followed by the required calibration weight.
4. Place the required weight on the scale the display will show “PASS”. Calibration is complete.

• SPECIFICATION:

1. Calibration: Auto calibration
2. Tare range: Tare full capacity
3. Operation temperature: 10-30° C
4. Display LCD 5 1/2” digits