Φίλτρα

Κατασκευαστής (1)
074.0104
1,80 (2,23 με ΦΠΑ)
DFRobot, DFR0028, 5212019508124

This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don’t touch, thus not making a connection.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0063
2,60 (3,22 με ΦΠΑ)
DFRobot, SEN0138-R, 5212019508261

A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be directly used to control small motors, solenoids, lamps, or other devices.

This is a small micro switch sensor designed for the Arduino. It could be directly connected to the IO Expansion shield. It integrates the pull-up resistor and the status indicator LED onboard. That makes it easier for testing.The miniature snap-action micro switch with roller lever make it suitable for more different environment application.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0064
2,60 (3,22 με ΦΠΑ)
DFRobot, SEN0138-L, 5212019508278

A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be directly used to control small motors, solenoids, lamps, or other devices.

This is a small micro switch sensor designed for the Arduino. It could be directly connected to the IO Expansion shield. It integrates the pull-up resistor and the status indicator LED onboard. That makes it easier for testing.The miniature snap-action micro switch with roller lever make it suitable for more different environment application.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0215
3,15 (3,91 με ΦΠΑ)
DFRobot, DFR0052
INTRODUCTION The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0050
3,20 (3,97 με ΦΠΑ)
DFRobot, DFR0026, 5212019508292

Here comes DFRobot's new Analog Ambient Light Sensor for Arduino or Raspberry Pi. Brand new design and much more convenient to use. This sensor help you to detect the light density and reflect the analog voltage signal back to Arduino controller. You can set the threshold of voltage level to trig other unit on Arduino project.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0209
3,20 (3,97 με ΦΠΑ)
DFRobot, 5212019508308
INTRODUCTION This is Gravity 4Pin sensor adapter which is special designed for 4Pin sensor. We have optimized its connection interface to make it...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0095
3,45 (4,28 με ΦΠΑ)
DFRobot, DFR0054, 5212019508322

This is an arduino rotation potentiometer , it is able to rotate upto 300-degree. With the Arduino IO expansion board, in combination, it can be very easy to achieve position-dependent interaction with the rotating effect or produce MIDI instrument. So with this sensor you can learn how rotary potentiometer works and what analog signal is. You can have much fun with this basic input device.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0352
3,50 (4,34 με ΦΠΑ)
Θέλετε να αλλάξετε τα φώτα απλά κουνώντας το χέρι σας; Ωστόσο, μπορεί να μην θέλετε να χρησιμοποιήσετε ένα περίπλοκο και δαπανηρό επιταχυνσιόμετρο τριπλού...
Άμεση
+
Προσθήκη στα αγαπημένα

074.0085
3,75 (4,65 με ΦΠΑ)
DFRobot, DFR0095, 5212019508339

An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light)--light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared remote control, for example, pushing a button sends an electric signal to the LED, which converts the signal into a beam of infrared light. The receiving device detects the light with a photo diode and converts it to an electrical signal which, via an integrated circuit, controls its actions.

Άμεση
+
Προσθήκη στα αγαπημένα

074.0101
3,75 (4,65 με ΦΠΑ)
DFRobot, DFR0027, 5212019508346

What's the simplest way to check vibration with Arduino? Use a vibration sensor from DFRobot. You can directly plug it on our IO Expesion Shield V7. Just vibrate this sensor, Arduino can receive a digital signal. It's easy to acount and program in Arduino.

Άμεση
+
Προσθήκη στα αγαπημένα