Δεν βρέθηκαν αποτελέσματα που να ταιριάζουν με τα κριτήρια αναζήτησης.
Panel Power Interface EU, Univeral for DLP Series, iFlex Series,iTouch Series and HDL-MSPU05.48 Wall Mount Ultrasonic & PIR Sensor
Panel Power Interface for iAlluminium Series BCU.
4 Zone Dry Contact Module, Switch,Temperature sensor input, Logics combination and dimming
iAlluminium Series 2 Button Smart Wall Panel, with LED Back lighting, and Engraving, Auto Lock Option function, IR Remote Control, Toggle, Dim, and double click macro function. (Standard Plate is aluminum but optional).
iFlex Series 1 Folder Smart Wall Panel EU,with LED Back lighting, and Engraving (Insert Paper), IR Remote Control(Optional),and Right/Left click (Glass color are optional) Wall Switch to control Lighting and dimming, Areas, and Moods.
iTouch Series 2 Button Smart Touch Panel EU, with LED Back lighting(RGB Color Selection on software), replaceable face plate by user, IR Receive Optional, Dimming, ON/OFF, Curtain control ,Scene control, Combination dimming.
Wall Mount Ultrasonic & Infrared Motion sensor, Embedded with function of with Ultrasonic Sensor, temperature Sensor, LUX and PIR, integrated with Logic
iAlluminium Series 4 Button Smart Wall Panel, with LED Back lighting, and Engraving, Auto Lock Option function, IR Remote Control, Toggle, Dim, and double click macro function. (Standard Plate is aluminum but optional).
iFlex Series 2 Folder Smart Wall Panel EU,with LED Back lighting, and Engraving (Insert Paper), IR Remote Control(Optional),and Right/Left click (Glass color are optional) Wall Switch to control Lighting and dimming, Areas, and Moods.
iFlex Series 3 Folder Smart Wall Panel EU,with LED Back lighting, and Engraving (Insert Paper), IR Remote Control(Optional),and Right/Left click (Glass color are optional) Wall Switch to control Lighting and dimming, Areas, and Moods.
Infrared Emitter, Supports 4 channel infrared interfaces, totally can store up to 650 infrared codes, The control modes are ON/OFF control, Temperature control, Cooling/Heating, Fan speed control, Swing control etc.
iTouch Series 4 Button Smart Touch Panel EU, with LED Back lighting(RGB Color Selection on software), replaceable face plate by user, IR Receive Optional, Dimming, ON/OFF, Curtain control ,Scene control, Combination dimming.
iAlluminium Series 8 Button Smart Wall Panel, with LED Back lighting, and Engraving, Auto Lock Option function, IR Remote Control, Toggle, Dim, and double click macro function. (Standard Plate is aluminum but optional).
Ceiling Mount Motion and Lux Sensor, includes 4 independent logic blocks and 1 combined logic block. The logic condition can be “AND”“OR” logic input conditions can be the condition of motion sensor, Lux, external conditions . According to different application requirements, the sensor can be configured as the master-slave mode or single mode
Motion and LUX Sensor Embedded with function of Temperature detecting, LUX detecting, Master & Slave control, Logic control etc. It has the function for sending of variety data points, can be used to control many different types of KNX devices.
Ceiling Mount Ultrasonic Sensor, includes 4 independent logic blocks and 1 combined logic block. The logic condition can be “AND”“OR” logic input conditions, can be the condition of ultrasonic sensor, Lux, external conditions .According to different application requirements, the sensor can be configured as the master-slave mode or single mode.
iFlex Series 4 Folder Smart Wall Panel EU,with LED Back lighting, and Engraving (Insert Paper), IR Remote Control(Optional),and Right/Left click (Glass color are optional) Wall Switch to control Lighting and dimming, Areas, and Moods.
8 Zone Dry Contact Module, With dry contact input, it has 2 work modes: sensors controller and logical controller.
Designed for the outdoors, the HDL- M/WS05.1-A, can precisely detect temperature, light intensity, humidity, motion, and dry contact status.With the ability to operate in temperatures ranging from -20 to +55 centigrade, and the potential for hundreds of output targets, the HDL M/WS05.1-A is the ultimate in building protection technology.
DIN-Rail Mount 110-240V AC(50/60Hz) 1-Short circuit protection 2-Green Led:Output normal 3-Red Led: Overload(I>Imax) 4-Reset: push button to reset bus
4 CH 16A Relay Module: Main Function | Statistical functions for running time of Channel Channel status | response 1-On/off status can be set when Power-Down or Power up | Timer Function | Scene Control | Threshold Function | Curtain Control function | Logic Function: And, Or, Xor, Gate |Heating Function: PWM control output
4 CH 10A Relay Module: Main Function | Statistical functions for running time of Channel | Channel status response | On/off status can be set when Power-Down or Power up | Timer Function | Scene Control | Threshold Function | Curtain Control function | Logic Function: And, Or, Xor, Gate | HeatingFunction: PWM control output
Leading edge and Trailing Edge Technology Dimmers complying with European safety standards and KNX association protocol.TrailingEdge Technology Dimmers Short circuit protection, over load protection,over Heat protection
1-Five channel 10A relay outputs 2-Two channel 0-10V DC outputs 3-Fan speed: High, Medium,Low 4-HVAC working mode: Heating, Cooling 5-HVAC operation mode: Standby mode, Comfort mode, Night mode, Frost protection 6-Fan speed and Valve status report 7-Seven local temperature sampling 8-BUS temperature sampling 9-Local temperature report 10-Seven channel floor heating outputs 11-Five control mode each floor heating channel 12-Seven channel output independently 13-Channel statistics total ON time 14-Channel state response 15-Channel state after bus voltage failure and recovery
24 Zone Dry Contact Module, it includes a 24 channel signal input, Dry contact type can be set Mechanical switch or Electronic switch.
8 CH 16A Relay Module: Main Function | Statistical functions for running time of Channel | Channel status response 1-On/off status can be set when Power-Down or Power up | Timer Function | Scene Control | Threshold Function | Curtain Control function | Logic Function: And, Or, Xor, Gate | Heating Function: PWM control output
1-Blinds operation mode 2-Curtain operation mode 3-Manual operation 4-Priority setup 5-Status can be set when Power-Down or Power up 6-Forced position operation 7-Limit position control 8-Status response for position 9-Status for operation 10-Scene control 11-Safety control 12-Automatic control
NEW Generation Smart DLP wall switch Panel EU, 3 pages For Lighting Control , Curtain Control, one page for floor heating Control, one page for AC control,customize user-friendly graphic, etc. option built-in mini infrared receiver.
8 CH 10A Relay Module: Main Function | Statistical functions for running time of Channel | Channel status response | 1-On/off status can be set when Power-Down or Power up | Timer Function | Scene Control | Threshold Function | Curtain Control function | Logic Function: And, Or, Xor, Gate | HeatingFunction: PWM control output
Edge Technology Dimmers complying with European safety standards and KNX association protocol.Trailing Edge Technology Dimmers Short circuit protection, over load protection,over Heat protection.
Leading edge and,Trailing Edge Technology Dimmers complying with European safety standards and KNX association protocol.Trailing Edge Technology Dimmers Short circuit protection, over load protection,over Heat protection.
Can connect up to 64 DALI devices for address assignment and management.also can be real-time to detect the device fault, such as DALI fault,Lamp fault,Ballast fault, for each channel and group, support Switch ON/OFF,Relative dimming,Absolute dimming,1bit and 1byte statues response function.
10A each Channel, FUNCTIONS 1-Statistics total ON time | 2-Status respone | 3-Status recovery | 4-Upper limit | 5-Lower limit | 6-Staircase light | 7-Flashing light | 8-Scene control | 9-Scene dimming | 10-Sequence control | 11-Threshold switch | 12-Heating actuator(PWM)
HDL KNX USB Interface, DIN-Rail Mount, with USB Conector galvanically isolated from KNX Bus that establish a bidirectional data connection between PC and KNX BUS, Enable addressing, setting parameters, visualzation, protocolin and diagnoisis of the bus devices.
Master/Slave Timer Controller This timer controller is embedded with RTC, can run real time itself, can used as master timer and slave timer.
12CH 10A Relay Module: Main Function | Statistical functions for running time of Channel | Channel statusresponse 1-On/off status can be set when Power-Down or Powerup | Timer Function | Scene Control | Threshold Function | Curtain Control function | Logic Function: And, Or, Xor, Gate | Heating Function: PWM control output
Leading edge and Trailing Edge Technology Dimmers complying with European safety standards and KNX association protocol.Trailing Edge Technology Dimmers Short circuit protection, over load protection,over Heat protection
16CH 10A Relay Module: Main Function | Statistical functions for running time of Channel | Channel status response 1-On/off status can be set when Power-Down or Power up | Timer Function | Scene Control | Threshold Function | Curtain Control function | Logic Function: And, Or, Xor, Gate | HeatingFunction: PWM control output
DMX Recorder with KNX association protocol. Make record and play back DMX program from the KNX software or KNX wall panels. recording time up to 4 hours;,supports the setting and play back of the DMX scenes.
12CH 16A Relay Module: Main Function | Statistical functions for running time of Channel | Channel status response 1-On/off status can be set when Power-Down or Powerup | Timer Function | Scene Control | Threshold Function | CurtainControl function | Logic Function: And, Or, Xor, Gate | Heating Function: PWM control output
Leading edge and Trailing Edge Technology Dimmers complying with European safety standards and KNX association protocol.Trailing Edge Technology Dimmers Short circuit protection, over load protection,over Heat protection.
HDL KNX IP Rounter, It can be used as line‐ or backbone coupler and provides a data connection between the upper KNX net/IP line (main line or backbone) and the lower TP KNX bus line (sub line). It also provides with the tunnelling protocol a connection point for ETS to enable commissioning and monitoring.
eibPort device connects your building control with Ethernet and Home-Entertainment. Thereby he used as desired different techniques. Besides KNX / Powernet KNX TP and the EnOcean radio system or an optional GSM radio connection is available. Through the network interface, it is e.g. possible to switch a beamer or start the preferred mp3 playlist by using a pushbutton. Furthermore, the eibPort provides an excellent visualization and automation of the whole building control.